Ready Stock | Samurai PAINT REMOVER PR500 Aerosol Motor Spray Paint (400ML)


10.5
WONG WENG KEONG

Ready Stock | Samurai PAINT REMOVER PR500 Aerosol Motor Spray Paint (400ML)

MYR10.50

**NO SHIPPING TO SABAH/SARAWAK**

100% BRAND NEW ORIGINAL SAMURAI PAINT REMOVER PR500 AEROSOL SPRAY PAINT

- It is a peeling-off and efficient remover

- Which is mainly used for removing the old layer of lacquer and paint to make them spray able.

- It has such advantages as convenient applying, quick-acting, non-flammable and water clean-up.

** Special formulation to remove old paint on plastic.

** Quick-acting.

** Safe for use on plastic materials.

 

Directions for use:

1. Remove grease, dirt, rust, moisture or loose paint from the surface to be sprayed. Cover adjacent areas to protect from spray mist.

2. Shake can calmly until metal agitator, moves freely for 2 minute. Remove plastic cap.

3. Hold can from a distance of 15-20 cm and point nozzle towards object to be sprayed.

4. Press nozzle firmly and move spray back and forth to deposit an even film of paint.

5. Clean nozzle immediately after use by turning can upside down and pressing nozzle for 5 seconds or until no more paint emerges.

6. If clogging develops, pull nozzle off and clean with thinner. Gently replace nozzle with a twisting motion while holding can away from you.

Availability:In stock
SKU MGP01
Details
**不运送到沙巴/砂拉越**

100% 全新原装武士脱漆剂 PR500 气溶胶喷漆

- 它是一种剥离和高效去除剂

- 主要用于去除旧的漆层和油漆层,使其可喷涂。

- 具有使用方便、见效快、不易燃、用水清洗等优点。

** 去除塑料上旧油漆的特殊配方。

** 快速行动。

** 可安全用于塑料材料。




使用说明:

1. 清除待喷涂表面的油脂、污垢、铁锈、水分或松散的油漆。覆盖相邻区域以防止喷雾。

2. 可平稳摇晃至金属搅拌器,自由移动2分钟。取下塑料盖。

3. 握住罐头,距离 15-20 厘米,将喷嘴指向要喷涂的物体。

4. 用力按压喷嘴并前后移动喷雾以沉积均匀的漆膜。

5. 使用后立即清洁喷嘴,将罐头倒置并按压喷嘴 5 秒钟或直到不再出现油漆。

6. 如果发生堵塞,请拔下喷嘴并用稀释剂清洁。保持罐头远离您,以扭转动作轻轻更换喷嘴。
More Information
More Information
Wallet Cash Back MYR0.00
Reviews

Write Your Own Review

You're reviewing:

Ready Stock | Samurai PAINT REMOVER PR500 Aerosol Motor Spray Paint (400ML)